Home BMW Problem with entrance brake 1995 R1100GS with ABS and sidecar connected

Problem with entrance brake 1995 R1100GS with ABS and sidecar connected

0
Problem with entrance brake 1995 R1100GS with ABS and sidecar connected

[ad_1]


Hello,

I’m having a problem with my entrance brake. 90% of the time once I apply the entrance brakes I get a superb strong response from the brake lever / brake actuation. 10% of the time the Brake lever travels 2/third of the way in which in direction of the grip previous to actuating the brakes. I nonetheless get brakes in direction of the tip of the throw however it isn’t nice and it hits the grip.

Some background: I simply purchased the bike with approx 9000 miles on it. Once I first seen this downside I came upon that my entrance brake grasp cylinder was leaking. I purchased a substitute piston for it, honed the grasp cylinder bore out and put it again collectively. I spent some high quality time bleeding it and it labored…. Till the identical downside got here again to hang-out me. Since that time I’ve spent some critical high quality time bleeding each entrance brakes and the ABS unit. I had some air come out initially and now I’m simply pushing clear brake fluid by way of the system. I’ve additionally checked the grasp cylinder and it isn’t leaking.

What’s bizarre to me is that after I discover an absence of resistance when pulling the brake lever I let it go and once I pull it once more I’ve full brakes.

Usually I might attribute this to air within the system however it’s bizarre that it solely occurs now and again.

I did verify that each rotors are nonetheless “floating” freely for no matter that’s value

Any ideas could be welcome

Cheers!!

[ad_2]

LEAVE A REPLY

Please enter your comment!
Please enter your name here